Ford 1920 Hydraulic oil dipstick

 

Remember this guy? I was reminded the other day that I'd made a promise to somebody on Reddit to post about the location of the hydraulic oil dipstick. I'd looked all over the machine and couldn't find it. The filler is really obvious on the back of the machine above the 3 point hitch but the dipstick was apparently missing. I finally bought the owners manual and discovered:

What we're looking at here is the floor in front of the operators feet. The bar going across is the parking brake lever. That little knob in the top center of the picture is the top of the dipstick. I'd dismissed it as a vent cover. Its rubber and needs to be pulled on pretty hard. The panel just in front of it is pretty tight too, a knuckle buster for sure...

Hopefully somebody else who has a 1920 and can't find the hydraulic dipstick will see this post and be helped.

I'm bi-tractoral!

 For years dad and I have talked about buying a compact diesel tractor with a loader. Neither of us is getting any younger and a mechanical "pick things up" machine would be super handy. At the beginning of the year I sold some stock and started looking.

Originally I'd planned to buy a construction backhoe. I'd seen some last fall for what I considered a reasonable price. Of course as soon as I started looking the prices doubled. The other problem is that even a small backhoe weighs 14,000# which puts you into commercial transport territory. I figured it'd be around $2,000 to get one moved to Caribou.

Eventually I relaxed my requirements and started looking at farm tractors. I settled on this:

It's a 1998 Ford 1920. Ford's numbering doesn't really make any sense to me, this is a 32hp machine. 4wd with a 12spd transmission. Most folks look for hydrostatic machines so a gear transmission is usually a little cheaper. For loader work it's not the best but I think for a mower or tiller it'll be fine. The transmission on this one is actually pretty cool, its 4spds each in 3 different ranges. The 4spds are synchronized so you can shift between them on the move. In practice the only on the move shifting I've done is in high range, it's hard on it to start out in road gear with a load.

I rented a U-Haul trailer to move it to Caribou. The tractor is about as narrow as you can go and use a U-Haul trailer, the front wheels just barely span the gap down the middle of the trailer. The old Dodge did a fine job pulling but the tractor has the areodynamics of a brick. I've pulled a similarly heavy car on a U-Haul trailer before and it towed much easier.

I hesitated to take the trailer all the way in to the camp but it was 10pm and I didn't want either the hassle of unhooking the trailer and hooking it back up or the uncertainty of unloading in the dark. In the end I decided I'd drive in until the trailer got hung up but it never did. Returning the trailer require a 90 point turn to get headed back up the road at camp.

Ideally the Ford is going to take over some mowing duties from the old Super M. I plan to get a 5' 3pt mower which will be much more convenient to use. Unfortunately it appears that the PTO clutch is stuck on. I hooked on to our 6' mower but couldn't get the PTO to engage. You can hear the gears clash and jump and it kicks back out. I need to pull the clutch inspection plate and have a look around. With any luck it'll be an easy fix.

Even with the fault I'm pretty happy, the engine starts with just a nudge of the key and has no computer controls. When I bought it I asked about the glow plugs and the guy said "I've never used them." I believe him, this thing has the best starting engine I've ever seen.

Along with a mower I'd like to get a scraper blade and maybe a backhoe. Ford/New Holland made one specifically for this machine, I saw one for sale just yesterday but it appears to be gone today. Alternately there are 3pt backhoes that are probably fine if you keep the limitations of the machine in mind. For now I'm pleased to be able to move some rocks/dirt. Angie has been building a wood fired pizza oven and the dirty old Ferd hauled a bunch of rocks for that project...